Qwiic Serie Accesorios SparkFun

Resultados: 16
Seleccionar Imagen N.° de pieza
 Fabricante:
Descripción Hoja de datos Disponibilidad Precio: (USD) Filtre los resultados en la tabla por precio unitario en función de su cantidad.
Cantidad RoHS Modelo ECAD Producto
Tipo
SparkFun Accesorios SparkFun The SparkFun weather:bit is a fully loaded "carrier" board for the micro:bit that when combined with the micro:bit provides you with a fully functional weather station. With the weather:bit you will have access to barometric pressure relative humi
Hoja de datos
2En existencias
Min.: 1
Mult.: 1
Carrier Boards Weather:bit
SparkFun Accesorios SparkFun The SparkFun Qwiic Connect System is constantly growing in popularity with makers. So to make it even easier to get started we've assembled this Qwiic Cable Kit for everyone. If you aren't sure which Qwiic cable to use this handy box includes all o
Hoja de datos
149En existencias
Min.: 1
Mult.: 1
No
Cables Qwiic Cable Kit
SparkFun Accesorios SparkFun Translating physical forces into digital data usually requires managing multiple components but the SparkFun Qwiic Scale simplifies the entire process. With the on-board NAU7802 this Qwiic breakout board acts as an all-in-one amplifier and Analog-t
Hoja de datos
75En existencias
Min.: 1
Mult.: 1
No
Breakout Boards Qwiic Scale
SparkFun Accesorios SparkFun The SparkFun Qwiic MicroPressure Sensor is a miniature breakout equipped with Honeywell's 25psi piezoresistive silicon pressure sensor. This MicroPressure Sensor offers a calibrated and compensated pressure sensing range of 60mbar to 2.5bar easy to
Hoja de datos
61En existencias
Min.: 1
Mult.: 1
No
Sensors
SparkFun Accesorios SparkFun Qwiic JST Connector- SMD 4-pin
Hoja de datos
5,445En existencias
MouseReel Disponible
Min.: 1
Mult.: 1
: 1,000

Connectors Tiny 4-Pin SMD Connector
SparkFun Accesorios SparkFun Buttons are an easy and tactile way to interface with your project but why would you want to deal with debouncing polling and wiring up pull-up resistors? The Qwiic Button with built-in red LED simplifies all of those nasty worries away into an ea
Hoja de datos
20En existencias
Min.: 1
Mult.: 1
Optoelectronics Red LED
SparkFun Accesorios SparkFun Buttons are an easy and tactile way to interface with your project but why would you want to deal with debouncing polling and wiring up pull-up resistors? The Qwiic Button with built-in green LED simplifies all of those nasty worries away into an
Hoja de datos
23En existencias
Min.: 1
Mult.: 1

Qwiic Button with Green LEDs
SparkFun Accesorios SparkFun SparkFun Qwiic Shield for Arduino 21En existencias
Min.: 1
Mult.: 1

Shields Qwiic Connect System
SparkFun Accesorios SparkFun The SparkFun Qwiic Shield for Arduino Nano provides you with a quick and easy way to enter into SparkFun's Qwiic ecosystem with your Arduino Nano board. The Qwiic shield connects the I2C bus (GND 3.3V SDA and SCL) on your Arduino Nano to four Spark
Hoja de datos
14En existencias
Min.: 1
Mult.: 1
Shields Qwiic Shield
SparkFun Accesorios SparkFun Have you ever wanted to control something powerful or have you ever needed to turn on/off a high power device from your Arduino or another low powered microcontroller? The SparkFun Qwiic Single Relay provides you with the easiest to use relay yet. Th
Hoja de datos
59En existencias
61En pedido
Min.: 1
Mult.: 1
No
Accessories Qwiic Single Relay
SparkFun Accesorios SparkFun Keypads are very handy input devices but who wants to tie up seven GPIO pins wire up a handful of pull-up resistors and write firmware that wastes valuable processing time scanning the keys for inputs? The SparkFun Qwiic Keypad comes fully assembl 12En existencias
Min.: 1
Mult.: 1
No
Accessories
SparkFun Accesorios SparkFun Buttons are an easy and tactile way to interface with your project but why deal with debouncing polling and wiring up pull-up resistors? The SparkFun Qwiic Button Breakout simplifies all those worries away into an easy-to-use I2C device. Utilizing
Hoja de datos
17En existencias
Min.: 1
Mult.: 1
Breakout Boards
SparkFun Accesorios SparkFun The SparkFun Qwiic Shield for Thing Plus provides you with a quick and easy way to enter into SparkFun's Qwiic ecosystem with your Thing Plus or Feather boards. Since the Thing Plus and Feather footprints are interchangable you can use this shield w
Hoja de datos
16En existencias
Min.: 1
Mult.: 1
Shields Qwiic Shield
SparkFun Accesorios SparkFun The SparkFun Qwiic Adapter provides the perfect means to make any old I2C board into a Qwiic-enabled board. This adapter breaks out the I2C pins from the Qwiic connectors to pins that you can easily solder with your favorite I2C-enabled device.The Qw
Más información disponible
Min.: 1
Mult.: 1

Adapters Qwiic Adapter
SparkFun Accesorios SparkFun This is not your normal Passive Infrared (PIR) sensor! The SparkFun AK9753 Human Presence Sensor Breakout is a Qwiic-enabled 4-channel Nondispersive Infrared (NDIR) sensor. Each channel has a different field of view so not only can the AK9753 detec
Hoja de datos
N/A
Min.: 1
Mult.: 1

Sensors Presence Sensor
SparkFun Accesorios SparkFun This SparkFun Qwiic Pro Micro BoogieBoard was a limited edition version of the Qwiic Pro Micro. We are now out of stock and are not reproducing it. The SparkFun Qwiic Pro Micro BoogieBoard is a Special Edition version of the SparkFun Qwiic Pro Micro No en existencias
Min.: 1
Mult.: 1
No
Qwiic Pro Micro BoogieBoards