SparkFun Electronics Accesorios SparkFun

Resultados: 915
Seleccionar Imagen N.° de pieza
 Fabricante:
Descripción Hoja de datos Disponibilidad Precio: (USD) Filtre los resultados en la tabla por precio unitario en función de su cantidad.
Cantidad RoHS Modelo ECAD Producto
Tipo
SparkFun Accesorios SparkFun This is a simple two wire cable. Great for jumping from board to board. 2-pin JST connector on one end bare cable on the opposite end.Dimensions: 100mm lengthDocuments:JST connector
Hoja de datos
No en existencias
Min.: 1
Mult.: 1

Wire & Cable Jumper Wire
SparkFun Accesorios SparkFun This is a very simple but handy 2" square double sided perf board. Standard 0.1" spacing with a 4-40 (3mm) holes for mounting. Great for quickly prototyping stackable circuits. No en existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun These 33mm (1.3") spring loaded pogo pins are great for programming and applications where you don't always want headers soldered onto your boards. We use them for our programming jigs in production. The pins fit snugly into most standard perf board
Hoja de datos
No en existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun These are standard screws with 2-56 thread and 3/8" long recommended for the small button pad sets. Can be used with a 2-56 nut.Sold in single units. No en existencias
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun Description: These are standard nuts with 2-56 thread. For use with 2-56 machine screws and five button pad set listed below.Sold in single units. No en existencias
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun This 2xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable sliding cover which is secured with a small phillips head screw. Another bonus is the ON/OFF switch which can be used to control No en existencias
Min.: 1
Mult.: 1

Battery Holders
SparkFun Accesorios SparkFun This beefy heatsink is designed to dissipate a lot of heat! The 6400BG heatsink fits TO-220 TO-218 TO-247 and Multiwatt packages - which means it's a great fit for the STA540 L298N and all of our T-220 package voltage regulators. No en existencias
Min.: 1
Mult.: 1

Heat Sinks
SparkFun Accesorios SparkFun This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin Molex connector with 0.1" spacing on one end bare cable on the opposite end. It also comes with the mating connector for the Molex.D
Hoja de datos
No en existencias
Min.: 1
Mult.: 1

Wire & Cable Jumper Wire
SparkFun Accesorios SparkFun This is a simple two wire cable. It has bare wires on both ends with a Molex A and B connector in the middle. With thicker 18 AWG wire it's better for higher current applications.Dimensions: 6" lengthDocuments:Datasheet
Hoja de datos
No en existencias
Min.: 1
Mult.: 1
Wire & Cable Jumper Wire
SparkFun Accesorios SparkFun This is a 10-pin header with 2mm pitch that mates with our XBee socket. It can be used for making 'dummy XBees' or anything else you want!Note: This item is sold singly not in pairs.Documents:Datasheet No en existencias
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun These nylon standoffs are 3/8" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure or just getting it up off the table. Sold as individuals. No en existencias
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun These nylon standoffs are 3/8" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure or just getting it up off the table. Each standoff has an outer diameter of 6mm.Sold in packs of 10. Check below for matching sc No en existencias
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun This is a 33 meter roll of polyimide tape. This tape is a fantastic insulator like electrical tape but it can withstand temperatures as high as 258 C (496 F). It also provides good resistance to corrosion and the silicone adhesive holds tight thr No en existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is a wire assembly terminated with a 8-pin JST-SH connector. Great for jumping from board to board or just about anything else. One end is terminated with a JST-SH connector and the other end is tinned bare wire leads.Note: The color of these wi No en existencias
Min.: 1
Mult.: 1

Cables
SparkFun Accesorios SparkFun This 3xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable sliding cover which is secured with a small phillips head screw. Another bonus is the ON/OFF switch which can be used to control No en existencias
Min.: 1
Mult.: 1

Battery Holders
SparkFun Accesorios SparkFun Copper tape has countless applications in electronics from creating low-profile traces for electrical components to RF-shielding and antenna-making. Copper tape is even used to join things together using solder like the stained glass on Tiffany lamp No en existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun These are standard 0.1" spaced header pins that can be surface mounted for applications where through-hole pins won't work. The surface mount side of the legs are staggered for stress relief.This is a 6-Pin male header.Documents:Datasheet No en existencias
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun These are standard 0.1" spaced header pins that can be surface mounted for applications where through-hole pins won't work. The surface mount side of the legs are staggered for stress relief.This is a 10-Pin male header.Documents:Datasheet No en existencias
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun These are standard 0.1" spaced header pins that can be surface mounted for applications where through-hole pins won't work. The surface mount side of the legs are staggered for stress relief.This is an 8-Pin female header.Documents:Datasheet No en existencias
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun These are standard 0.1" spaced header pins that can be surface mounted for applications where through-hole pins won't work. The surface mount side of the legs are staggered for stress relief.This is a 6-Pin female header.Documents:Datasheet No en existencias
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun These nylon standoffs are 3/4" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure or just getting it up off the table. The black nylon will give your project a very sessy look.Sold in packs of ten. Check below No en existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This high discharge LiPo is a great way to power any R/C robotic or portable project. This is an excellent choice for anything that requires a small battery with a lot of punch. The voltage is low enough not to tax your regulating circuits and the

SparkFun Accesorios SparkFun This 4xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable sliding cover which is secured with a small phillips head screw. Another bonus is the ON/OFF switch which can be used to control No en existencias
Min.: 1
Mult.: 1

Battery Holders
SparkFun Accesorios SparkFun PCB mount clip to hold a AAA battery. Sold in single units you'll need two for each battery. These work great for small low power applications that need a battery to run. Low cost and easy to use!Documents:Datasheet No en existencias
Min.: 1
Mult.: 1

Battery Holders
SparkFun Accesorios SparkFun This 6 position screw terminal block provides a simple way to connect wires to a single connection point. These blocks allow wires to be screwed together and self-isolated without needing to twist solder or any other splicing by this method wiring No en existencias
Min.: 1
Mult.: 1