Marki Microwave RF e inalámbricos

Resultados: 589
Seleccionar Imagen N.° de pieza
 Fabricante:
Descripción Hoja de datos Disponibilidad Precio: (USD) Filtre los resultados en la tabla por precio unitario en función de su cantidad.
Cantidad RoHS
Marki Microwave Herramientas de desarrollo RF The EVB-MFLP-00002P is a connectorized evaluation board for the MFLP-00002PSM passive MMIC surface mount 9.40GHz lowpass filter.
Hoja de datos
Más información disponible
Min.: 1
Mult.: 1


Marki Microwave Herramientas de desarrollo RF The EVB-MFLP-00011P is a connectorized evaluation board for the MFLP-00011PSM passive MMIC surface mount 7.1GHz lowpass filter.
Hoja de datos
Más información disponible
Min.: 1
Mult.: 1


Marki Microwave Herramientas de desarrollo RF The EVB-MFLP-00028 is a connectorized evaluation board for the MFLP-00028CSP1 passive MMIC surface mount 10.7 GHz lowpass filter.
Hoja de datos
Más información disponible
Min.: 1
Mult.: 1


Marki Microwave Herramientas de desarrollo RF This is the evaluation board for the MM1A-0626SPSM integrated drive GaAs MMIC mixer.
Hoja de datos
Más información disponible
Min.: 1
Mult.: 1

Marki Microwave Herramientas de desarrollo RF The EVB-MMPX-00001P is a connectorized evaluation board for the MMPX-00001PSM is a MMIC surface mount quadplexer capable of multiplexing 2-4 GHz / 6-8 GHz / 10-12 GHz / 14-16 GHz signals.
Hoja de datos
Más información disponible
Min.: 1
Mult.: 1

Marki Microwave Herramientas de desarrollo RF The EVB-MPD-0422F is a connectorized evaluation board for the MPD-0422FCSP2 MMIC 4-22GHz 2-Way power divider/power splitter.
Hoja de datos
Más información disponible
Min.: 1
Mult.: 1


Marki Microwave Herramientas de desarrollo RF The EVB-MPD4-0218 is a connectorized evaluation board for the MPD4-0218CSP3 MMIC 2-18 GHz 4-Way power divider/power splitter.
Hoja de datos
Más información disponible
Min.: 1
Mult.: 1

Marki Microwave Herramientas de desarrollo RF The EVB-MPDW-0670 is a connectorized evaluation board for the MPDW-0670CSP2 MMIC 6-70GHz 2-Way power divider/power splitter.
Hoja de datos
Más información disponible
Min.: 1
Mult.: 1

Marki Microwave Amplificador de RF The ADM-8350PSM is a high-linearity, low noise amplifier capable of providing +22 dBm output power up to 6 GHz. The ADM-8350PSM can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers.
Hoja de datos
10En existencias
Min.: 1
Mult.: 1

Marki Microwave Amplificador de RF A small, low power, and economical T3 driver or T3A pre-amplifier. It is a GaAs PHEMT distributed amplifier in a 3mm QFN surface mount package.
Hoja de datos
Plazo de entrega no en existencias 10 Semanas
Min.: 25
Mult.: 25

Marki Microwave Amplificador de RF A wideband distributed low noise amplifier capable of providing 19 dB gain and +29 dBm OIP3 from DC to 18 GHz and a low 1.7 dB typical noise figure from 4 to 14 GHz.ADM-8344 is available A 4mm QFN and can be supplied from a single positive bias.
Hoja de datos
Plazo de entrega no en existencias 10 Semanas
Min.: 25
Mult.: 25

Marki Microwave Amplificador de RF The ADM-8475PSM is a high-linearity, low noise amplifier capable of providing 13 dB gain, +26 dBm OIP3 and 2 dB noise figure across a broad 0.5-18 GHz bandwidth.
Hoja de datos
Plazo de entrega no en existencias 10 Semanas
Min.: 25
Mult.: 25

Marki Microwave Amplificador de RF The ADM-8536PSM is one of the world's smallest 2-20 GHz high linearity, low noise amplifier solution, featuring 10.5 dB gain, +25 dBm OIP3 and 2.5 dB noise figure, making it suitable for use in RF front-ends.
Hoja de datos
Plazo de entrega no en existencias 10 Semanas
Min.: 25
Mult.: 25

Marki Microwave Amplificador de RF A high-linearity low noise amplifier capable of providing 15.5 dB gain, 2 dB noise figure and +26 dBm OIP3 up to 10 GHz. The amplifier is suitable for use in RF front-ends requiring low noise, high gain and excellent signal fidelity.
Hoja de datos
Plazo de entrega no en existencias 10 Semanas
Min.: 1
Mult.: 1

Marki Microwave Amplificador de RF A high-linearity, low noise amplifier capable of providing 11.5 dB gain and +25 dBm OIP3 across a broad 0.2-20 GHz bandwidth. It's low power consumption, high dynamic range and size make it an ideal choice for RF front end, low SWaP applications.
Hoja de datos
Plazo de entrega no en existencias 10 Semanas
Min.: 25
Mult.: 25

Marki Microwave Amplificador de RF A high-linearity low noise amplifier capable of providing 18 dB gain, 1.5 dB noise figure and +27 dBm OIP3 from 750 MHz to 8 GHz. It can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers.
Hoja de datos
Plazo de entrega no en existencias 10 Semanas
Min.: 1
Mult.: 1

Marki Microwave Amplificador de RF A wideband distributed low noise amplifier capable of providing 16 dB gain and +25 dBm OIP3 from 2 to 20 GHz and a low 1.8 dB typical noise figure from 8 to 16 GHz.
Hoja de datos
Plazo de entrega no en existencias 10 Semanas
Min.: 25
Mult.: 25

Marki Microwave Amplificador de RF A wideband distributed low noise amplifier capable of providing 16 dB gain and +24 dBm OIP3 from 10MHz to 26 GHz and a low 2.5 dB typical noise figure from 6 to 20 GHz.
Hoja de datos
Plazo de entrega no en existencias 10 Semanas
Min.: 25
Mult.: 25

Marki Microwave Amplificador de RF A wideband distributed amplifier capable of providing 14.5 dB gain and +31 dBm OIP3 from 100MHz to 22 GHz. The ADM-9181PSM is an ideal linear signal amplifier for applications requiring low power consumption and small form-factors.
Hoja de datos
Plazo de entrega no en existencias 10 Semanas
Min.: 1
Mult.: 1

Marki Microwave Adaptadores RF - En series The ADPFKFK is a 2.92mm Female to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 6 mm fixed wrench recommended.
Hoja de datos
Plazo de entrega no en existencias 12 Semanas
Min.: 1
Mult.: 1

Marki Microwave Adaptadores RF - Entre series The ADPFVFK is a 2.4mm Female to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 or 6 mm fixed wrench recommended.
Hoja de datos
Plazo de entrega no en existencias 12 Semanas
Min.: 1
Mult.: 1
Marki Microwave Adaptadores RF - En series The ADPFVFV is a 2.4mm Female to 2.4mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-50 GHz bandwidth. 3/8" torque wrench and 6 mm fixed wrench recommended.
Hoja de datos
Plazo de entrega no en existencias 12 Semanas
Min.: 1
Mult.: 1
Marki Microwave Adaptadores RF - Entre series The ADPFVMK is a 2.4mm Female to 2.92mm Male straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 mm fixed wrench recommended.
Hoja de datos
Plazo de entrega no en existencias 12 Semanas
Min.: 1
Mult.: 1
Marki Microwave Adaptadores RF - En series The ADPMKFK is a 2.92mm Male to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 mm fixed wrench recommended.
Hoja de datos
Plazo de entrega no en existencias 12 Semanas
Min.: 1
Mult.: 1

Marki Microwave Adaptadores RF - En series The ADPMKMK is a 2.92mm Male to 2.92mm Male straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 mm fixed wrench recommended.
Hoja de datos
Plazo de entrega no en existencias 12 Semanas
Min.: 1
Mult.: 1